|
We Calibrate All
Technologies
& Manufacturers Flow Meters |
Turbine
-
Positive Displacement -
Coriolis Electromagnetic -
Thermal mass -
Target
Ultrasonic -
Variable Area -
Laminar (wedge)
|
For 24 Hour
Turnaround:
Call 800-528-4225 |
|
|
|
|
|
GRAVIMETRIC FLOW STAND |
PISTON PROVERS |
BELL PROVERS |
Ideally suited for calibration of electronic
flow meters that require longer stabilization
times
(Mag, Coriolis)
|
Ideally suited for mechanical meters that have
fast response times,
and for all technologies
that may require calibration at different
fluid viscosities |
Primary calibration of all gas flow meters at
relatively low pressures |
|
1/2" to 6"
flow meters
Max flow to 600 gpm
0.08% uncertainty of volumetric or mass flow
rate (95% C.L.)
2 pts including 3 repeats each, std
Custom calibration points available
NIST Traceable Cal Cert
|
Water, solvent or custom blends to 100+ cSt
0.001 to 1200 gpm
NIST Traceable Cal Cert
ISO 17025 accredited calibrators
UVC plots (if applicable)
+/-0.025% uncertainty of volumetric flow
rate (95% C.L.)
Electronics programming and scaling available
|
Air or
pressurized gas
0.1 to 125 ACFM
NIST Traceable Cal Cert
UVC plots (if applicable)
+/-0.2% uncertainty of volumetric flow rate
(95% C.L.)
Electronics programming and scaling available |
Flow Technology
has over 50 years experience calibrating flow
meters. Our accredited flow calibration lab
provides NIST traceable primary standard
liquid and gas flow calibrations and
verifications. With over 20 calibrators,
including our newest flow loop for electronic
flow meters we can calibrate all meter types.
We supply independent results on your flow
meter. In addition to maintaining the
calibration history on your flow meter, we
supply a custom calibration report with each
calibration that plots historical flow
comparisons. Thus, allowing you to make good,
informed decisions.
|
|
WHY YOU SHOULD CHOOSE FTI...
|
|
FAST
...24 hour turn available
|
ACCURATE
...measurement uncertainty to 0.025%
...all flow calibration traceable to NIST
|
ACCREDITED
...ISO/IEC 17025 accredited
...ANSI/NCSL Z540 accredited
|
EXPERTISE
...dedicated technical staff
...repair service available for most flow
meters
|
DATA TRENDING
...custom calibration report supplied with
each meter
...graphical comparison of last 3
calibrations
|
|
WE ALSO OFFER CUSTOM SOLUTIONS |
|
DOCUMENTATION §
PROGRAMMING
§
PIPING CONFIGURATION
§
SPECIAL BLENDS
§
CLEANING
§
REPAIRS |
|
Contact us for
additional information
on our World Class Products or to coordinate
Calibration Services
for your Flow Measurement Applications.
|
